top of page

NAET TESTING AND FEEDBACK PANEL

NAET Testing Panel

The NAET Profile screen contains several important features. The upper left corner of the screen provides a view of the NAET program reactivity items. 23 test kits or 2001 pre-programmed items appear in this scrollable list. Click on the red Test Potential-All Items button to perform a reactivity test. The three highest reactivity values will be displayed along with their numerical values and highlighted in red, yellow and blue respectively. To apply feedback, select the red Metaspace or Harness button to perform an automatic 1-minute quick feedback procedure of each of the top 3 items. For a longer feedback procedure, set the timer to the desired feedback length (or leave the 3-minute default setting) and then click Harness or Metaspace to initiate feedback. To stop feedback, click the Stop Feedback button. If you desire to feedback a single item, click on that item and then click on Metaspace or Harness to initiate feedback. The Quick Cycle feature allows for consequetive 1 minute feedback cycles of main items selected plus additional feedback items or combinations.

In the upper right is a circular graphic containing additional feedback items. Place a check in any or all of the boxes found in the Add Additional Feedback panel. Then click the red Metaspace or Harness button in the rectangular box on the right to perform an automatic 1-minute quick feedback procedure. For a longer feedback procedure set the timer to the feedback length (or leave the 3-minute default setting) and then click Harness or Metaspace to initiate feedback. To stop feedback, click the Stop Feedback button.

If you use the default setting for feedback, the additional feedback items will be automatically added at the end of the main feedback at a 1/6 time interval. i.e. a 3 minute feedback will be divided into 1 minute each for the top 3 main reactivity items and 10 seconds for each selected additional feedback item.


MULTIPLE COMBINATIONS TREATMENT OPTION:
Right click on the test results panel and a multiple treatment window will pop up. Select the items you like to feedback in one treatment and click “add”. Set the timer and click harness. The treatment time will be equally divided between the selected items.

NAET Combination Treatment Panel

The lower left corner provides a view of the Basic Items Test. The first 3 NAET kits, 234 pre-programmed basic items appear in this scrollable list. Click on the red Test Potential – Basic Items Test button to perform a reactivity test. The three highest reactivity values will be displayed and highlighted in red, yellow and blue respectively. To apply feedback, follow the same procedures as with the All Items NAET test.

The Print Results button will allow you to view and save a printable version of your top ten test results. It will save it in a document folder for later retrieval or e-mail attachement.

To retrieve saved results go to: my documents – click on Imaet sysfolder – click on patient reports – click on individual patient’s folder – and finally click on the selected testing or assessment date.
 

Please note: Feedback choices and selections are not recorded. For that you still must maintain a patient chart!

Return to the main menu by clicking the Wellness Info button.

Summary of Features:

The NAET Profile

 

 

  • Click on the red “Test Potential-All” items to perform a reactivity test of all 1560 NAET items, or 20 kits.

  • To apply 1- minute feedback on each of the top 3 items, click the red “Metaspace” or “Harness” button.

    • Option: For longer feedback set the timer to the desired feedback length (or leave the 3-minute default setting)

    • Option: Click Harness or Metaspace to initiate feedback.

    • Option II: To initiate multiple combination feedback right click on test results page, select items and ‘add’.

    • To stop feedback, click the Stop Feedback button.


Add Additional Feedback

  • Place a check in any or all of the boxes found in the “Add Additional Feedback panel.”

  • To perform a 3-minute feedback procedure, click the red “Metaspace” or “Harness” button

    • Option: For a longer feedback procedure set the timer to the desired feedback length (or leave the 3-minute default setting)

    • Option: Click “Harness” or “Metaspace” to initiate feedback.

    • Option: To stop feedback, click the Stop Feedback button.


The Basic Items Test

  • Click on the red “Test Potential-Basic Items Test” to perform a reactivity test of the first 3 NAET kits items.

  • To apply 3- minute feedback on select a single item, click the red “Metaspace” or “Harness” button.

    • Option: For longer feedback set the timer to the desired feedback length (or leave the 3-minute default setting)

    • Option: Click Harness or Metaspace to initiate feedback.

    • Option: To stop feedback, click the Stop Feedback button.


PLEASE NOTE: You may only do one test panel per visit!! Either the Basic Items Scan (first 3 kits), or the full NAET Potential Scan (all 20 kits).

Follow up on your result with a NAET treatment or IMAET feedback!

  • Food Allergies

  • Allergies to any number of allergens

  • Thoughts of self-doubt that block perceptual awareness

  • Nutritional deficiencies

  • Inadequate intake of water or oxygen

  • Toxic stress factors such as fungus, bacteria, viruses, and chemical agents.

  • The presence of heavy metals

  • Prescription drugs or other synthetic compounds.

  • Geopathic stressors as well as parasites.

bottom of page